Table of Contents
Advertisement
Charge Key (1-8) Options
Option
1
DESC
2
HALO
3
AMOUNT TEND
COMP.
4
OVER/UNDER
TENDER IN MGR
CONTROL
5
DISABLE UNDER
TEND.
DOES DRAWER
6
OPEN
ALLOW OVER
7
TEND.
8
NON-ADD # ENTRY
COMPULSORY
9 -
EXEMPT TAX 1 –
12
TAX4
13 COMPULSORY
VALIDATION
14 SEND TO EFT
15 EFT PORT (0-3)
16 ALLOW ROUNDING Y or N
17 SELECT CARD
TYPE
18 SHOW TIP ON
(See ** Note: below)
** Note: Before selecting charge key option 18 setting, determine the Transaction Type (type of card) and
when tips are to be entered:
If the card is a CREDIT card, and the draft will be presented to the customer and the tip will be added
later from the TIP OPERATION function of the DATATRAN OPERATION menu, select (PRINT TIP
LINE ONLY).
If the card is a CREDIT card, and all payments are made at a cashier station, choose (REG) to prompt
for tip entry on the ECR display; choose (PINPAD) to prompt for tip at the PIN-Pad.
190 • Integrated Payment Appendix
Entry
Description
Alpha numeric
You can program a unique descriptor. The default descriptors
24 character
are CHARGE 1-8.
7-digit amount
You can limit errors by setting the maximum amount that can be
tendered. "0" means that there is no entry limit.
Y or N
Select Y if you want to force the operator to enter the tendered
amount and let the register calculate the change.
Y or N
Select Y if you do not want the operator to tender more than the
amount of the sale and issue change. When selected, over
tendering is allowed only in the MANAGER MODE.
Y or N
Select Y if you do not want the operator to tender less than the
amount of the sale.
Select N if you do not want the drawer to be opened with this
Y or N
key.
Select Y if you wish to allow tender greater than the amount of
Y or N
the sale.
Y or N
Select Y if you wish to enforce the entry of a non-add number
prior to tendering.
Y or N
Select Y to exempt the appropriate tax automatically when
finalized with this key.
Y or N
Choose Y to enforce validation if an optional printer with
validation capability is connected to a Serial port.
Y or N
Set to Y for integrated payment EFT/EMV operations.
[0-3]
Enter the port # where the integrated payment device is
connected.
Select Y if you wish to allow rounding when pressing the
CHARGE 1~CHARGE 8 key. Always N for EMV
[Card Type]
None, Credit, Debit, Gift, Gift No NSF, Cash Benefit
[Selection]
REG
PINPAD
PRINT TIP LINE ONLY
Sam4s ER-260EJ/256EJ OP Manual v1.20
Advertisement
Table of Contents
