Table of Contents
Advertisement
Descriptor Code Method
If you customize your keyboard by covering key locations, or by installing double or quad size keys,
you will need to program descriptors using the descriptor code method. See "SYSTEM" of "Options
Programming" on page 142. You must set the "DESC. PGM METHOD" option to be CODE TYPE.
Program Sequence
1. With the cursor pointed at a descriptor field, refer to the Descriptor Code Chart
2. For each additional character, type the code. Each character will be displayed as it
3. Press CASH when the descriptor is complete.
Program Example
To program the descriptor "APPLE", type:
[065] [080] [080] [076] [069] [CASH]
A
P
P
For DOUBLE (wide) characters enter 999 before each descriptor code. For example:
A = [999] [065] [CASH]
108 • Program Mode Programming
below and type the code for the first character.
is entered.
L
E
Sam4s ER-260EJ/256EJ OP Manual v1.20
Advertisement
Table of Contents
