Z Reports
Z reports reset the totals and counters within the report.
General Instructions for Z Reports
80 • Z Mode
1. Move the key to the Z lock position to display the Z Mode menu.
2. From the Z Mode menu press CASH (or press 1 and CASH) to select the Z Reports
menu with the first option displayed:
Z REPORTS
1.FINANCIAL
3. You can now use the CHARGE1 and the CHARGE2 keys to scroll up and down
through the Z Mode menu. Or, if you already know the menu number of the report
you with to generate, you can enter the digit (1-7) directly. The Z Report menu
contains the following reports:
1.FINANCIAL
2.TIME
3.PLU
4.CLERK
5.GROUP
6.MIX & MATC H
7.STOCK
4. When a report is selected, the options with the report class are displayed. In some
cases, further options are displayed.
5. Use CHARGE1 and the CHARGE2 keys to scroll up and down through the
options displayed: Press the CASH key to select the displayed option. With a
specific report selected, the reports will start when the CASH key is pressed.
Refer to the table on the following page to view the menu selections for each report
type.
Sam4s ER-260EJ/256EJ OP Manual v1.20