Table of Contents
Advertisement
Group Programming - Reference Information
#
Option
1
DESC
2
ADD TO GROUP TOTAL
3
SEND TO KP
4
KP PORT #: RECEIPT
5
KP PORT #: 1
6
KP PORT #: 2
7
KP PORT #: 3
8
PRINT RED ON KP
9
GIFT CARD
120 • Program Mode Programming
Entry
Description
Alpha numeric
You can program a descriptor for each group. Type the
24 character
descriptor using the Program Overlay or by using the
descriptor code method (see page 104.). The overlay is
automatically activated when the cursor is pointing at the
DESC field. The default descriptors are GROUP 01,
GROUP 02, etc.
Y or N
Select N if you do not wish this groups total to be added
to the total of all groups on the Group report.
Select Y if you wish to send PLU's reporting to this
Y or N
group to a kitchen printer.
Select Y if you wish to print a kitchen requisition at the
Y or N
register.
Y or N
Select Y if you wish to print a kitchen requisition at the
Port1.
Y or N
Select Y if you wish to print a kitchen requisition at the
Port2.
Y or N
Select Y if you wish to print a kitchen requisition at the
Port3.
Select Y if you wish items reporting to this group to print
Y or N
in red on the kitchen printer. (Note, the kitchen printer
must have red/black printing capability, and this option
does not apply to the register receipt printer.)
Y or N
Sam4s ER-260EJ/256EJ OP Manual v1.20
Advertisement
Table of Contents
