Function Key Programming - Sam4s ER-260EJ Operating And Programming Manual

Function Key Programming

Program the appropriate Charge function keys that will be used to finalize electronic payment
transactions; Charge key function keys are key codes 323-330. Charge keys can be programmed as
Credit, Debit, Gift, Gift No NSF or Cash Benefit keys.
Charge keys must be assigned to the keyboard before programming the option settings.
Charge Key Programming
Sam4s ER-260EJ/256EJ OP Manual v1.20
1. Move the key to the P lock position to display the Program Mode menu.
2. Press the CHARGE1 twice to select "3.FUNCTION KEY" and press CASH or
press 3 and CASH to display the FUNCTION KEY screen.
FUNC TION KEY
1.FUNCTION KEY
2.MACRO
3. Press 1 and CASH to select FUNCTION KEY menu.
ENTER FUNC.KEY
TO BE PROGRAMMED
4. Press the CHARGE key you wish to program.
5. Use the CHARGE1 and the CHARGE2 keys to scroll up and down through the
options for the function key you have selected. The pages that follow detail the
reference information for each key.
6. Select option "14.SEND TO EFT" and press the CASH, press CHARGE2 to
select the option value to [Y], press the CASH to save the setting.
7. Select option "15.EFT PORT (0-3)" and press the CASH. Enter the port number
where the DataTran device is connected and press CLEAR to set the value and return
to the charge key programming.
8. Select option "17.SELECT CARD TYPE" and press the CASH. Use the
CHARGE1 and the CHARGE2 keys to scroll up and down through the options
until the correct card type is displayed. Press the CASH to save the setting.
9. Select option "18.SHOW TIP ON" and press the CASH. Use the CHARGE1 and
the CHARGE2 keys to scroll up and down through the options until the desired
option is displayed. Press the CASH to save the setting
10. Press CLEAR to return to the FUNCTION KEY menu.
11. Press CLEAR again to return to the PROGRAM MODE menu
Integrated Payment Appendix • 189