Z Mode; Overview; Accessing Z Mode Functions - Sam4s ER-260EJ Operating And Programming Manual

Z Mode

Overview

All Management Functions take place with the control lock in the X or Z position. In this way, only
those with the correct key will have access to these functions.
The following procedures are done from the Z mode menu:







Accessing Z Mode Functions

Sam4s ER-260EJ/256EJ OP Manual v1.20
Z Reports
Reset Electronic Journal
Reset Not Found PLU List
Connect Server
Datatran Function
Datatran Transaction
1. Move the key to the Z lock position to display the Z Mode menu.
Z MODE
1.Z REPORTS
2. You can now use the CHARGE1 and the CHARGE2 keys to scroll up and down
through the Z Mode menu. Or, if you already know the menu number of the X
Mode function you with to perform, you can enter the digit (1-6) directly.
The following Z Mode functions are available:
1.Z REPORTS
2.RESET E.J
3.RESET NOT FOU ND PL U
4.CONNECT SE RVE R
5.DATATRAN F UNC TION
6.DATATRAN T RAN SACTI ON
Z Mode • 79