DATAMAX LCD MODULE
The Datamax LCD Module is only present in Sharp
TM
SX
Baggers that are equipped with a printer.
TESTING
There are no testing procedures for the Datamax
LCD Module.
ADJUSTMENT
There are no adjustments necessary on the
Datamax LCD Module.
REPLACEMENT
WARNING
Always remove electrical power from the
SX prior to performing any maintenance
on the machine.
1. Remove the six screws holding the Frame
Cover, set screws and Frame Cover aside
(Figure 3-133).
2. Remove the White Ribbon Cable from the back
of the Display (Figure 3-134).
3. Remove the two screws holding the Printer
Front Panel (Figure 3-135). Remove panel and
set aside.
SX™
Service and Maintenance Manual
ELECTRICAL COMPONENTS (1099 & 1108)
SECTION 3 – COMPONENT REPAIR
Figure 3-133. Frame Cover Screws
Figure 3-134. White Ribbon Cable Lock
Figure 3-135. Remove LCD Module Cover Screws
3-51
960714-02B © 2007 I2407