Sharp SX 1075 Service Maintenance Manual page 3

SAFETY LABELS
The following label is placed on the Sharp SX™
wherever a removable shield or panel guards the
heated sealing area. Always disconnect electrical
power from the machine prior to removing any
guards and/or panels.
The following label is used where there is the
potential of your hands, long hair, jewelry, etc.
becoming entangled between two rotating parts.
Be sure to secure loose items before approaching
and operating the machine.
The following label on the Sharp SX™ is located
where there is the potential of injury due to pinch
points or moving parts. Make certain electrical
power is disconnected before removing any guards
and/or panels or servicing the machine.
SX™
Service and Maintenance Manual
IMPORTANT SAFETY INFORMATION
The following label is located in the proximity of a
fused circuit. Be certain to replace blown fuses
ONLY with fuses with the same electrical rating.
Always disconnect
removing any guards and/or panels or servicing the
Sharp SX™.
The label shown on the right
is placed on the Sharp SX™
wherever a removable shield
or panel guards electrical
components.
Always disconnect electrical
power from the machine prior
to removing any
and/or panels.
electrical power before
guards
960714-02B © 2007 I2407