Misfeed In The Duplex Module - Sharp MX-M350U Operation Manual

Misfeed in the duplex module

1 Unlatch the duplex module and slide it to
the left.
If the duplex module has an exit tray, rotate
2
it up out of the way and open the cover of
the duplex module.
While holding the exit tray up, remove the
3
misfed paper as shown in the illustrations
below.
Close the cover of the duplex module and
4
lower the exit tray.
Unlatch the unit and
gently move the module
away from the machine.
If no exit tray is attached,
just open the cover of the
duplex module and
ignore any reference to
the tray in the following
steps.
If paper is misfed at the
upper part of the duplex
module, gently remove it
while taking care not to
tear the paper.
If paper is misfed at the
lower part of the duplex
module, gently remove it
while taking care not to
tear the paper.
5 Gently close the duplex module.
■ Misfeed in the bypass tray
Unlatch the duplex module and slide it to
1
the left.
2 Remove the misfed from the bypass tray.
3 Gently close the duplex module.
MISFEED REMOVAL
After closing the duplex
module, confirm that the
misfeed message is
cleared and the normal
display appears.
Unlatch the unit and
gently move the module
away from the machine.
Be careful not to tear the
misfed paper during
removal.
Be careful not to tear the
misfed paper during
removal.
After closing the duplex
module, confirm that the
misfeed message is
cleared and that the
normal display appears.
2-19
2