Sharp SX 1075 Service Maintenance Manual page 164

JAW POSITION SENSORS (con't)
5. Route the new sensor cable through the
machine, following the path taken by the old
cable. Be sure to secure the cable to existing
wire bundles or frame members to keep clear
of moving parts.
6. Follow the steps outlined in the "Adjustments"
section on page 3-141 to secure the sensor(s)
in place.
7. Replace any guards removed in the previous
steps.
SX™
Service and Maintenance Manual
SECTION 3 – COMPONENT REPAIR SECTION 3 – COMPONENT REPAIR
UNWIND ASSEMBLY SEALER ASSEMBLY
3-144 960714-02B © 2007 I2407