Loading Paper In The Duplex Module/2 X 500 Sheet Paper Drawer; Specifications (Duplex Module/2 X 500 Sheet Paper Drawer) - Sharp AR-C260P Operation Manual

LOADING PAPER

Loading paper in the duplex module/2 x 500 sheet paper drawer

Upper tray:
The upper tray contains a duplex module that automatically turns print paper over for automatic two-sided printing.
Middle and lower paper trays:
Up to 500 sheets of paper recommended for colour or SHARP recommended plain paper can be loaded in the middle
and lower trays. The method of loading paper is the same as for paper tray 1 in the main unit. See the explanation
on page 2-2.
NOTE
If the size of paper being loaded is different from the previous size, or is an extra size, or if the paper type is different
from the previous type, you must change the paper tray settings in the custom settings. Change the settings as
explained in "Setting the paper type (except for the bypass tray)" on page 2-12 and "Specifying the size when the
paper size is set to "Extra" (except for the bypass tray)" on page 2-13.

Specifications (duplex module/2 x 500 sheet paper drawer)

Name
Power supply
Power consumption
Dimensions
Weight
Duplex module
Size of plain paper
Weight of plain paper
Number of sheets
2 x 500 sheet paper drawer
Paper size/weight
Paper capacity
Specifications are subject to change for improvement without notice.
2-8
Duplex module/2 x 500 sheet paper drawer
Supplied from the main unit
35.6 W or less
600 mm (W) x 642 mm (D) x 403 mm (H) (23-5/8" (W) x 25-9/32" (D) x 15-7/8" (H))
Approximately 31 kg or 68.2 lbs.
A3, B4, A4, A4R, B5, B5R, A5, 11" x17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11",
8-1/2" x 11"R, 7-1/4" x 10-1/2", 5-1/2" x 8-1/2"
64 to 200g/m 2 or 17 to 54 lbs.
One sheet (single pass type)
See "2-trays paper drawer" in the paper tray specifications (next page 2-9)
Paper recommended for colour (80 g/m
SHARP standard paper (80 g/m
(not including the adjuster)
2 or 20 lbs.): 500 sheets;
2
or 20 lbs.): 500 sheets