24 VDC POWER SUPPLY (con't)
7. Reconnect all wires to the Power Supply
(Figure 3-36).
8. Place new Power Supply in the Sharp SX
Bagger in the same location and orientation as
the old power supply.
9. Use screws from old Power Supply and secure
new Power Supply to the frame.
10. Reconnect power cord to the Sharp SX
Bagger and turn machine on.
11. Set your DVOM to a range capable of
measuring 24 VDC.
SX™
Service and Maintenance Manual
ELECTRICAL COMPONENTS
TM
TM
3-14
SECTION 3 – COMPONENT REPAIR
Figure 3-36. 24 VDC Power Supply
960714-02B © 2007 I2407