Clearing The Bank Settings - Omron ZW Series User Manual

Chapter 3
Setting the Banks

Clearing the Bank Settings

Clear (Initialize) the setting of the currently selected bank.
Settings in system setting and settings displayed in RUN mode are not initialized.
Here is an explanation of the procedure for clearing the bank.
Operating procedure
Steps
1
2
3
4
5
ZW
3-46
User's Manual
Key operation Display
RUN RUN
H L
FUN FUN
L
TEACH TEACH
ZERORST/ ESC ZERORST/ ESC
ZERO/ SET ZERO/ SET
ZERORST/ ESC ZERORST/ ESC
ZERO/ ZERO/ SET SET
RUN RUN
FUN FUN
H L
L
TEACH TEACH
RUN RUN
Press key for two seconds to enter the FUN
UNLIT
FUN FUN
L
TEACH TEACH
mode.
RUN RUN
Press or keys to select either of "BANK" and
press key.
ZERO/ SET ZERO/ SET
Press or keys to select either of "BK.CLR"
and press key.
ZERO/ ZERO/ SET SET
"OK/CAN" is displayed on the sub-display.
Press key to clear the bank setting or
ZERO/ SET ZERO/ SET
to cancel.
RUN RUN
Press key for two seconds to enter the RUN
LIT
FUN FUN
L
TEACH TEACH
mode.
RUN RUN
Description
ZERORST/ ESC ZERORST/ ESC
key