Table of Contents
Advertisement
Installing the UC 320W and Phones
Connecting Wired and Wireless Headsets (Optional)
Connecting Wired and Wireless Headsets (Optional)
Unified Communications UC 320W Administration Guide
The IP phones support wired and wireless headsets from different manufacturers.
Cisco SPA 525 models also support Bluetooth headsets. For the latest supported
models, contact your reseller.
Each brand and type of headset may require different steps for connection.
Consult the documentation for your particular headset for more information.
Additional information can be found at the manufacturer's websites:
www.plantronics.com
www.jabra.com
Task
Connecting a wired
headset
Connecting a Wireless
(non-BlueTooth) headset
Connecting and enabling
a Bluetooth headset
Cisco SPA 525 models
Instructions
Connect the 2.5mm connector from the headset
into the headset port on the right side of the IP
phone.
Connect the headset's telephone cord into the
telephone port on the back of the IP Phone.
Available on Cisco SPA 525 models only
To enable Bluetooth:
1. Press the Setup button.
2. Select User Preferences.
3. Select Bluetooth Configuration.
4. Press the Right Arrow key to turn Bluetooth
5. Press Save.
1
On
.
38
Advertisement
Table of Contents
