Configuring Phone (Fxs) Ports For Analog Devices - Cisco UC 320W Administration Manual

Small business unified communications

Table of Contents

Configuring Line (FXO) Ports, Phone (FXS) Ports, and IP Telephone (SIP/BRI) Services

Configuring Phone (FXS) Ports for Analog Devices

TIP

NOTE

Unified Communications UC 320W Administration Guide

Settings:

•

Enabled: Check the box to enable the port. Uncheck the box to disable the

port.

•

Alternate Label (optional): Type a descriptive label for the port (optional

but recommended). For example, enter the published telephone number.

The label will appear on various pages of this configuration utility, and on

the phone display for any Shared Extensions or Shared FXO Lines that you

configure for this trunk. For best display on the phones, enter a short

description, such as a phone number (without dashes).

Use the FXS page to enable the Phone (FXS) port for an analog phone or fax

machine. You also can configure additional FXS ports on any SPA 8800 IP

Telephony Gateways that are connected.

Opening this page: From the navigation pane, choose Trunks > FXS.

To enable a port, check the Enabled box. To disable a port, uncheck the box.

Enabling the UC 320W built-in FXS port does not affect the user count on your

license.

Enlarge picture:

Check this box if you want to view the picture at a larger size, for easier reading.

View System Map:

Click this link to view an illustration of the devices and services in the Unified

Communications System.

Table of Contents