Table of Contents
Advertisement
Configuring Line (FXO) Ports, Phone (FXS)
Ports, and IP Telephone (SIP/BRI) Services
Configuring Line (FXO) Ports for Traditional Telephone Service
NOTE
TIP
Unified Communications UC 320W Administration Guide
Use the Trunks module to configure your telephone services.
Refer to these topics:
•
Configuring Line (FXO) Ports for Traditional Telephone Service, page 66
•
Configuring Phone (FXS) Ports for Analog Devices, page 67
•
Configuring SIP/BRI Trunks for Voice over IP Services, page 68
•
Trunks Summary, page 70
Use the Lines (FXO) Trunks page to enable the FXO ports for your telephone lines
(traditional analog telephone service). This page includes the FXO ports on your
Unified Communications system and any SPA 8800 IP Telephony Gateways that
are connected.
The Unified Communications System supports up to 12 simultaneous calls on all
trunks (including FXO and SIP/BRI trunks).
Opening this page: From the navigation pane, choose Trunks > Line (FXO) Trunks.
Enlarge picture:
Check this box if you want to view the picture at a larger size, for easier reading.
View System Map:
Click this link to view an illustration of the devices and services in the Unified
Communications System.
6
66
Advertisement
Table of Contents
