Setting System Time, Date, And Hour Mode; Programming Using The Det; Programming Using Pc-Dba - Vertical Comdial DX-80 Technical Manual

P S F
ROGRAMMING YSTEM

4.19 Setting System Time, Date, and Hour Mode

The DX-80 system provides a built-in time clock to track system time for certain features such as system night
service mode change, SMDR, alarm clock – system, automatic CO line ringing, extension, and time and date
display at executive speakerphones. This clock is battery-protected from power failure. You can change the
system time at any DET, using the attendant password.
You can also choose what time format (standard 12-hour time or 24-hour time) the system uses to display the time
at DETs. The following conditions apply to the hour mode.
• The system does not display "AM" and "PM" indications.
• When programming time-related features, use 24-hour format.
• SMDR output is in 24-hour format regardless of the settings of hour mode.

4.19.1 PROGRAMMING USING THE DET

Note: chg, bksp, save, one, always, del, and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password.
2. Press show. The system displays the DB Item Select screen.
3. Enter 08-03, then press save. This advances you to the Hour Mode programming screen.
4. Press chg to change to select 12/24 Hour Mode.
5. Enter 08-14, then press save. This advances you to the System Time programming screen.
6. Press show. The system displays the Year field.
7. Press chg to change the year for the system clock.
Or...
Press next to advance to the next system clock field (month, day, weekday, hour, minutes).
8. Press chg and enter data as required. Program the other database items for the system clock in the same
manner.
9. Press the Hold button to exit system time programming and return to the previous menu level.
10. Exit the programming mode.

4.19.2 PROGRAMMING USING PC-DBA

1. Select Programming from the PC-DBA menu and press Enter. The system displays the Database Program-
ming menu.
2. Use the arrow keys to highlight System Application and press Enter. The system displays the System Appli-
cation menu.
3. Highlight Category 1, and then press Enter. The system displays the System Application menu.
> S S
EATURES ETTING YSTEM
T , D , H M
IME ATE AND OUR
- 100 -
DX-80 Programming Manual
ODE