Vertical Comdial DX-80 Technical Manual page 230

P U
ROGRAMMING NIFORM
16. Finally, you must assign what extensions you want to include in this UCD group. Highlight Member and
press Enter. The system displays the Uniform Call Distribution—Hunt Group Member: Hunt Group x
screen.
17. Highlight Mem1, and press Enter. Key in the first extension number in this UCD group and press Enter.
18. In the same manner, identify up to 23 other extensions you want to use in this hunt group.
19. When you are done, press Esc to return to the Uniform Call Distribution—Parameter Programming: Hunt
Group x screen. The system prompts: "Exit This Feature?"; press Y for yes.
20. The system prompts "Save Current Setting?" Press Y to save your changes.
21. The system then prompts "File Exists, Override?" Press Y to continue with the save operation.
22. Press Esc to return to the Uniform Call Distribution—Parameter Programming: Hunt Group x screen.
23. You are now finished programming the first UCD group. In the same manner, program as many UCD
groups as you need.
24. When you are done, press Esc to return to the Please Input Hunt Group Number screen. Press Esc again to
return to the Extension Application screen. The system prompts: "Exit This Feature?"; press Y for yes.
25. The system prompts "Save Current Setting?" Press Y to save your changes.
26. The system then prompts "File Exists, Override?" Press Y to continue with the save operation.
27. Press Esc to return to the Extension Application menu. Press Esc again to return to the Database Program-
ming menu.
28. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send.
C D (UCD) G
ALL ISTRIBUTION
> P
ROUPS ROGRAMMING
- 230 -
UCD
DX-80 Programming Manual
S