Vertical Comdial DX-80 Technical Manual page 79

DX-80 Programming Manual
27. The system provides two pages of individual speed dial numbers, from 1 to 20. Use the Page Up and Page
Down buttons to find the page containing the individual speed dial number you want to change. Highlight
the SPD. No. field and press Enter.
28. Enter the new telephone number, using special characters as required.
• Pause = P
• Flash = / (forward slash)
• Speed Numbering Chaining = @ + next speed number (500-699).
Press Enter. The default is NULL.
29. In the same manner, program other individual speed dial numbers as needed.
30. When you are done, press Esc to return to the "Please Input DIR No." prompt. Press Esc again. The sys-
tem prompts: "Exit This Feature?"; press Y for yes.
31. The system prompts "Save Current Setting?" Press Y to save your changes.
32. The system then prompts "File Exists, Override?" Press Y to continue with the save operation. The system
returns you to the SPD. No. Programming menu.
33. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send.
P S F
ROGRAMMING YSTEM
- 79 -
> P
EATURES ROGRAMMING
S D N
PEED IAL UMBERS