Vertical Comdial DX-80 Technical Manual page 66

P S F
ROGRAMMING YSTEM
4. Assign the Reminder1 in the Tenant 1 field. Press Enter, then key in when you want the system to play the
reminder, in 24 hour format. Valid times are from 00:00 to 23:59. The default is NULL (no reminder).
After you have keyed in the time, press Enter.
5. In the same manner, assign reminders to tenant groups 2 and 3 as required. Then continue to assign remind-
ers 2 through 8 as needed.
6. Next, highlight Play Time for Tenant 1. Press Enter to choose the duration of the reminder, from one to ten
minutes. The default is one minute.
7. In the same manner, assign the reminder durations for tenant groups 2 and 3 as needed.
8. When you are done, press Esc to return to the Database Programming screen. The system prompts: "Exit
This Feature?"; press Y for yes.
9. The system prompts "Save Current Setting?" Press Y to save your changes.
10. The system then prompts "File Exists, Override?" Press Y to continue with the save operation.
11. Press Esc to return to the Database Programming menu.
12. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send.
> A S
EATURES SSIGNING
R
YSTEM EMINDERS
- 66 -
DX-80 Programming Manual