Table of Contents
Advertisement
DX-80 Programming Manual
4. Locate the directory/extension number you want to program. You may need to press Page Up or Page
Down to find the directory number; this menu contains five pages.
5. Highlight OHVA Active and press Enter to set OHVA on or off for this extension. Valid options are Y or N.
The default is yes.
6. Next, specify if you want the system to accept OHVA calls for this extension. Highlight OHVA Accept and
press Enter to select Y or N. The default is yes.
7. In the same manner, program OHVA for other extensions as needed.
8. When you are done, press Esc to return to the Database Programming screen. The system prompts: "Exit
This Feature?"; press Y for yes.
9. The system prompts "Save Current Setting?" Press Y to save your changes.
10. The system then prompts "File Exists, Override?" Press Y to continue with the save operation.
11. Press Esc to return to the Database Programming menu.
12. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send.
P
E
ROGRAMMING
XTENSIONS
- 267 -
> S
U
O
H
ETTING
P
FF
OOK
V
A
OICE
NNOUNCE
Advertisement
Table of Contents
