Vertical Comdial DX-80 Technical Manual page 237

DX-80 Programming Manual
1. Enter 06-02-1~3-02-02, where 1~3 = Tenant Group.
2. Press save, then press chg. Enter the prefix numbers you want the system to use to identify a call as a spe-
cific CO line. Press save.
3. Press next to continue programming the various call handling digits (prefix/suffix).
4. Press the Hold button to return to the previous menu level,
Or,
Press the Volume button (up or down) to return to the DB Item Selection screen.
Next, program the VM Table – Prefix Table – CO Recall.
1. Enter 06-02-1~3-02-02, where 1~3 = tenant group.
2. Press save, then press chg. Enter the prefix numbers you want the system to use to identify a call as a spe-
cific CO line recalling. Press save.
3. Press next to continue programming the various call handling digits (prefix/suffix).
4. Press the Hold button to return to the previous menu level,
Or,
Press the Volume button (up or down) to return to the DB Item Selection screen.
Next, program VM Table – Prefix Table – UCD Overflow.
1. Enter 06-02-1~3-02-02, where 1~3 = tenant group.
2. Press save, then press chg. Enter the prefix numbers you want the system to use to identify a call as a UCD
Overflow Announcement. Press save.
3. Press next to continue programming the various call handling digits (prefix/suffix).
4. Press the Hold button to return to the previous menu level,
Or,
Press the Volume button (up or down) to return to the DB Item Selection screen.
Next, program VM Table – Suffix Digit.
1. Enter 06-02-1~3-03, where 1~3 = tenant group.
2. Press save, then press chg. Enter the suffix numbers you want the system to use to identify a call as the
mailbox owner. Press save.
3. Press next to continue programming the various call handling digits (prefix/suffix).
4. Press the Hold button to return to the previous menu level,
Or,
Press the Volume button (up or down) to return to the DB Item Selection screen.
Next, program VM Table – Record Digit.
1. Enter 06-02-1~3-03, where 1~3 = tenant group.
2. Press save, then press chg. Enter the numbers you want the system to use to activate recording for this mail-
box owner. Press save.
3. Press next to continue programming the various call handling digits (prefix/suffix).
P V M
ROGRAMMING OICE AIL
- 237 -
> P T P
ROGRAMMING HIRD
VM, A P
ARTY NALOG ORTS