Table of Contents
Advertisement
DX-80 Programming Manual
4. Locate the directory number you want to program. You may need to press Page Up or Page Down to find
the directory number; this menu contains five pages.
5. Highlight Monitor Class and press Enter to select the monitor class of service you want to use for this
extension. Valid choices are classes 0 through 9, where 0 is the highest monitoring COS and 9 is the lowest.
The default is 5.
6. In the same manner, program the monitor COS for other extensions as needed.
7. When you are done, press Esc to return to the Database Programming screen. The system prompts: "Exit
This Feature?"; press Y for yes.
8. The system prompts "Save Current Setting?" Press Y to save your changes.
9. The system then prompts "File Exists, Override?" Press Y to continue with the save operation.
10. Press Esc to return to the Database Programming menu.
11. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send.
P
E
ROGRAMMING
XTENSIONS
- 261 -
> S
M
ETTING UP
ONITORING
P
RIVILEGES
Advertisement
Table of Contents
