Vertical Comdial DX-80 Technical Manual page 238

P V M
ROGRAMMING OICE AIL
4. Press the Hold button to return to the previous menu level,
Or,
Press the Volume button (up or down) to return to the DB Item Selection screen.
Next, program VM Table – Delete Digit.
1. Enter 06-02-1~3-03, where 1~3 = tenant group.
2. Press save, then press chg. Enter the numbers you want the system to use to delete the current recording for
this mailbox owner. Press save.
3. Press next to continue programming the various call handling digits (prefix/suffix).
4. Press the Hold button to return to the previous menu level,
Or,
Press the Volume button (up or down) to return to the DB Item Selection screen.
Next, program the VM Table – Disconnect Digit.
1. Enter 06-02-1~3-03, where 1~3 = tenant group.
2. Press save, then press chg. Enter the numbers you want the system to use to to force disconnect of the
active port. Press save.
3. Press next to continue programming the various call handling digits (prefix/suffix).
4. Press the Hold button to return to the previous menu level,
Or,
Press the Volume button (up or down) to return to the DB Item Selection screen.
Next, program VM Dialing Ratio – Tone Time.
1. Enter 03-33-01.
2. Press save. This advances you to Call Handling – VM Dialing Ratio – Tone Time.
3. Press chg until the Tone Time you want to use displays. Press next to program Inter-Digit Time.
Finally, program VM Dialing Ratio – Inter-Digit Time.
1. Enter 03-33-02 and press save. This advances you to Call Handling – VM Dialing Ratio – Inter-Digit Time.
2. Press chg until the inter-digit time you want to use displays.
3. Press the Hold button to return to the previous menu level,
Or, press the Volume button (up or down) to return to the DB Item Selection screen,
Or, exit programming.
> P T P
ROGRAMMING HIRD
VM, A P
ARTY NALOG ORTS
- 238 -
DX-80 Programming Manual