Vertical Comdial DX-80 Technical Manual page 209

DX-80 Programming Manual
24. Press Esc to return to the Auto Attendant menu.
25. Next, program the answer position for AA. Highlight ATT — Category 3 and press Enter. The system dis-
plays the Call Handling — ATT: Category 3 menu.
26. Highlight the Day field for the tenant group 1. Press Enter and key in the daytime answer position you want
to use for this tenant group. This answer position is the DX-80 system directory number (extension, UCD
group, or virtual number) where you want the system to route callers when they cannot be routed automati-
cally. Acceptable entries include any valid directory number. The default is extension 101.
27. Highlight the Alt field for the tenant group 1. Press Enter and key in the alternate answer position you want
to use for this tenant group. This answer position is the DX-80 system directory number (extension, UCD
group, or virtual number) where you want the system to route callers when they cannot be routed automati-
cally. Acceptable entries include any valid directory number. The default is extension 101.
28. Highlight the Eve field for the tenant group 1. Press Enter and key in the evening answer position you want
to use for this tenant group. This answer position is the DX-80 system directory number (extension, UCD
group, or virtual number) where you want the system to route callers when they cannot be routed automati-
cally. Acceptable entries include any valid directory number. The default is extension 101.
29. In the same manner, program day, evening, and alternate answer positions for tenant groups 2 and 3 IF they
are used on your system.
30. When you are done, press Esc to return to the Database Programming screen. The system prompts: "Exit
This Feature?"; press Y for yes.
31. The system prompts "Save Current Setting?" Press Y to save your changes.
32. The system then prompts "File Exists, Override?" Press Y to continue with the save operation.
33. Press Esc to return to the Database Programming menu.
34. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send.
P C H
ROGRAMMING ALL ANDLING
- 209 -
> P A A
ROGRAMMING UTO
M
TTENDANT ODULE