Table of Contents
Advertisement
P
E
ROGRAMMING
XTENSIONS
4. Highlight the Password field for directory number you want to program and press Enter. Note: You may
have to use the Page Down key find the directory number if it is on the second page of this menu.
5. Enter the password you want to use. Valid passwords use any digit, up to the extension length. The default
is all zeros (0000 for 4 digit passwords, 00000 for 5 digit passwords, etc.).
6. In the same manner, program other extension passwords as needed.
7. When you are done, press Esc to return to the Database Programming screen. The system prompts: "Exit
This Feature?"; press Y for yes.
8. The system prompts "Save Current Setting?" Press Y to save your changes.
9. The system then prompts "File Exists, Override?" Press Y to continue with the save operation.
10. Press Esc to return to the Database Programming menu.
11. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send.
> A
P
SSIGNING A
ASSWORD TO THE
E
XTENSION
- 252 -
DX-80 Programming Manual
Advertisement
Table of Contents
