Table of Contents
Advertisement
DX-80 Programming Manual
8. Enter additional members in the same manner. Press the Hold button when you have finished entering
members, then press next.
9. Next, select the hunting method you want to use for this UCD group. Enter 06-01-01~24-04.
10. Press chg to select the hunting method for this UCD group, then press next. Valid options are Linear, Dis-
tributed, and All Ring. The default is Linear.
11. Next, program the UCD no answer timer. Enter 06-01-01~24-05. Press chg.
12. Key in how long you want the system to ring an extension in this UCD group before pulling the call back
and ringing the next extension in the hunt group, then press save. Valid options are 5 to 60 seconds. The
default is 10.
13. Press next.
14. Next, program the UCD Overflow 1 Timer. Enter 06-01-01~24-06. Press chg.
15. Enter how long you want a call to remain in the queue before the system routes it to the overflow 1 destina-
tion, then press save. Valid options are 0 to 255 seconds. The default is 0.
16. Press next.
17. Next, program the UCD Overflow 1 Destination. Enter 06-01-01~24-07. Press chg.
18. Enter the UCD directory number where you want the system to send the queued caller when the overflow 1
timer has expired, then press save. Valid options include any valid extension or UCD directory number.
The default is NULL.
If the destination is a third-party RAD device that is connected to a DX-80 analog port, enter that port num-
ber here. If the destination is the DX-80 optional integrated voice mail, enter extension number 433.
19. Press next.
20. Next, program the UCD Overflow 2 Timer. Enter 06-01-01~24-08, then press chg.
21. Enter how long you want a call to remain in the queue after the overflow 1 timer has expired. When this
occurs, the system routes the queued call to the overflow 2 destination. Press save. Valid options are 0 to
255 seconds. The default is 0.
22. Press next.
23. Next, program the UCD Overflow 2 Destination. Enter 06-01-01~24-09. Press chg.
Enter the UCD directory number where you want the system to send the queued caller when the overflow 2
timer has expired, then press save. Valid options include any valid extension or UCD directory number.
The default is NULL.
If the destination is a third-party RAD device that is connected to a DX-80 analog port, enter that port num-
ber here. If the destination is the DX-80 optional integrated voice mail, enter extension number 433.
24. Press next.
25. Next, program the UCD Overflow Count. Enter 06-01-01~24-10. Press chg.
26. Enter the number of times you want the system to play the contents of the Overflow 2 Destination (RAD)
for this UCD group. Then press save. Note: The system removes the call from this UCD queue once it
plays the announcement the number of times you specify here. The valid options are from 1 to 255 times.
The default is 1.
27. Press next.
28. Finally, program the UCD Reroute Destination. Enter 06-01-01~24-11, then press chg.
P
U
ROGRAMMING
NIFORM
- 227 -
C
D
(UCD) G
ALL
ISTRIBUTION
> P
ROUPS
ROGRAMMING
Advertisement
Table of Contents
