Vertical Comdial DX-80 Technical Manual page 138

P CO L
ROGRAMMING INES
4. Highlight the FAX Destination field for the CO line port (4, 8, 12, or 16) that you want to receive fax trans-
missions. Press Enter.
5. Key in the directory number of the analog port that is connected to the FAX machine, then press Enter.
Valid numbers include any analog extension port directory number. The default is NONE.
6. In the same manner, assign fax destinations for other CO Line ports as needed.
7. When you are done, press Esc to return to the Database Programming screen. The system prompts: "Exit
This Feature?"; press Y for yes.
8. The system prompts "Save Current Setting?" Press Y to save your changes.
9. The system then prompts "File Exists, Override?" Press Y to continue with the save operation.
10. Press Esc to return to the Database Programming menu.
11. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send.
> S U FAX D
ETTING P ETECTION
- 138 -
DX-80 Programming Manual