Vertical Comdial DX-80 Technical Manual page 110

P S F
ROGRAMMING YSTEM
2. Highlight CO Line DIR No. Length to specify how many digits you want to use in the CO line directory
numbers. Press Enter to select 1, 2, 3, or 4. The default is 3.
3. In the Leading 1 field, enter the range of digits you want to allow extension users to dial when accessing a
CO line. This number can have 1 to 4 digits, depending on what you entered in the Length field. The
default is 74 (with the default lenght of 3 digits, this setting enables directory numbers 740 through 749). If
you want to allow a single number instead of a range, enter the number in this field; for example, assuming
a 3 digit length, enter 740 to enable that number only.
4. In the Leading 2 field, enter another number or range of numbers you want extension users to dial to access
a CO line, in addition to the number you specified in Leading 1. This number can have 1 to 4 digits,
depending on what length you set. The default is 75 (with the default length of 3 digits, this setting enables
directory numbers 750 through 759).
5. If you want to provide a third number or set of numbers that extension users can dial to to access a CO line,
specify that number/range in the Leading 3 field. The default is NULL.
6. In the same manner, program the Music Source, Loud Bell, External Pager, Virtual Number, and Meet Me
Conference directory number lengths and leading digits.
7. When you are done, press Esc to return to the System Application menu. The system prompts: "Exit This
Feature?"; press Y for yes.
8. The system prompts "Save Current Setting?" Press Y to save your changes.
9. The system then prompts "File Exists, Override?" Press Y to continue with the save operation.
10. Press Esc to return to the System Application menu. Press Esc again to return to the Database Programming
menu.
11. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send.
> C
EATURES USTOMIZING THE
N P
UMBERING LAN
- 110 -
DX-80 Programming Manual