Vertical Comdial DX-80 Technical Manual page 31

DX-80 Programming Manual
4. Press Enter to begin programming. The system displays the Database Programming screen and positions the
cursor on Extension. You access all of the various programming parameters of the system from the Database
Programming screen.
While you are programming the database using PC-DBA programming, the system stores any changes you
make in its working directory—not in the DX-80 system memory. When you have finished making your
programming changes, you must perform a SEND operation. They system then overwrites the system mem-
ory with whatever you have programmed into the working directory. Until you perform the SEND com-
mand, none of your changes are in effect.
• Use the arrow keys to highlight the category of your choice, then press Enter to open that category and
begin programming database parameters as required.
• Use the arrow keys on your keyboard to select (highlight) the various menu levels and database
parameters. Then press Enter to open that level/parameter.
• There are many menu levels within Database Programming. It is often necessary to use Page Up and
Page Down to view all elements of some categories.
P O
ROGRAMMING PTIONS
- 31 -
> U PC-D A
SING ATABASE
(PC-DBA)
DMINISTRATION