Vertical Comdial DX-80 Technical Manual page 143

DX-80 Programming Manual
5. Next, program the Unsupervised Conference time. Press Page Down. The system displays the Call Han-
dling—Category 1 [2/2] menu.
6. Highlight Unsupervised Talk Time and press Enter to select the amount of time you want to allow in unsu-
pervised conference calls. Valid options are 0 to 120 minutes, in increments of 10 (0, 10, 20, 30, etc.). The
default is 0, which means unlimited unsupervised conference calls.
7. When you are done, press Esc to return to the Call Handling screen. The system prompts: "Exit This Fea-
ture?"; press Y for yes.
8. The system prompts "Save Current Setting?" Press Y to save your changes.
9. The system then prompts "File Exists, Override?" Press Y to continue with the save operation.
10. Press Esc to return to the Call Handling menu. Then press Esc again to return to the Database Programming
menu.
11. Finally, program the Conference Tone Operation. Highlight Category 3 and press Enter. The system dis-
plays the Call Handling—Category 3 menu.
12. Highlight Conference Tone and press Enter to select either Y or N. The default is Y.
P C H
ROGRAMMING ALL ANDLING
- 143 -
> P C
ROGRAMMING ONFERENCE
C
ALLS