Table of Contents
Advertisement
P
E
ROGRAMMING
XTENSIONS
2. Use the arrow keys to highlight Extensions and press Enter. The system displays the Extension menu.
3. Highlight Category 1 and press Enter. The system displays the Extension—Category 1 menu.
4. Locate the extension number that you want to assign to a tenant group. Use Page Up and Page Down if
necessary to highlight the Tenant Group field for that extension.
5. Press Enter to assign the tenant group number. Valid options are tenant groups 1, 2, or 3. The default is 1.
If your system is not divided into tenant groups, use group 1.
6. In the same manner, assign other extensions to tenant groups as needed.
7. When you are done, press Esc to return to the Database Programming screen. The system prompts: "Exit
This Feature?"; press Y for yes.
8. The system prompts "Save Current Setting?" Press Y to save your changes.
9. The system then prompts "File Exists, Override?" Press Y to continue with the save operation.
10. Press Esc to return to the Database Programming menu.
11. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send.
> A
E
SSIGNING
XTENSIONS TO
T
G
ENANT
ROUPS
- 254 -
DX-80 Programming Manual
Advertisement
Table of Contents
