Vertical Comdial DX-80 Technical Manual page 232

P U
ROGRAMMING NIFORM
4. Highlight Port Type for the analog port connected to the RAD (you may have to use Page Up and Page
Down to find it.) Press Enter to select V.A.
5. In the same manner, assign VA port types for any other analog port connect to a RAD you want to use in the
VA group.
6. When you are done, press Esc to return to the Extensions menu. The system prompts: "Exit This Feature?";
press Y for yes.
7. The system prompts "Save Current Setting?" Press Y to save your changes.
8. The system then prompts "File Exists, Override?" Press Y to continue with the save operation.
9. Press Esc to return to the Extensions menu. Press Esc again to return to the Database Programming screen.
10. Program your UCD group as described in Section 8.3.2, Programming Using PC-DBA. Be sure to program
the UCD group number you want to use as the V.A. group. Also be sure to assign V.A. in the Attribute field.
11. Finally, for the overflow destination fields, enter the V.A. UCD group number.
12. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send.
C D (UCD) G
ALL ISTRIBUTION
> S U UCD V
ROUPS ETTING P
- 232 -
A (VA) G
OICE NNOUNCE ROUPS