Vertical Comdial DX-80 Technical Manual page 289

DX-80 Programming Manual
To clear the feature keys on an extension, perform the following steps.
1. While the extension is idle (no call activity), press Feature 5 8. The display prompts for the password.
2. Enter the extension password then press show. The display prompts for confirmation:
3. Press go. The system resets all the feature keys to the default settings, and then plays a confirmation tone.
P
ROGRAMMING
PSWD :_
bksp show chg
FTR KEY RESET
go
- 289 -
F B > F
EATURE UTTONS EATURE
K R
EY ESET