Vertical Comdial DX-80 Technical Manual page 88

P S F
ROGRAMMING YSTEM
4. Highlight the DIR No. field for DSS Unit 1 and press Enter. Key in the directory number of the digital port
to which the DSS Console is connected, and press Enter. Valid port directory numbers include any avail-
able, non-conflicting port directory number. The default is NULL.
5. Highlight the DSS Owner field for DSS Unit 1 and press Enter. Key in the number of the extension with
which this DSS will operate, and press Enter. Valid extension numbers include any available, non-conflict-
ing extension number. The default is NULL.
6. In the same manner, assign DSS port numbers and extension numbers for the remaining DSS units as
needed.
7. When you are done, press Esc to return to the Database Programming screen. The system prompts: "Exit
This Feature?"; press Y for yes.
8. The system prompts "Save Current Setting?" Press Y to save your changes.
9. The system then prompts "File Exists, Override?" Press Y to continue with the save operation.
10. Press Esc to return to the Database Programming menu.
11. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send.
> A
EATURES SSIGNING THE
DSS P /O
ORT WNER
- 88 -
DX-80 Programming Manual