Vertical Comdial DX-80 Technical Manual page 242

P V M
ROGRAMMING OICE AIL
11. Highlight Suffix Digit and key in the suffix numbers you want the system to use to identify a call as the
mailbox owner, then press Enter. Valid codes are up to two digits in length and can include digits 0-9, *, #,
and letters A - D. The default is NULL.
12. Highlight Record Digit and press Enter. Key in the numbers you want the system to use to activate record-
ing for this mailbox owner, then press Enter. Valid codes are up to four digits in length and can include dig-
its 0-9, *, #, and letters A - D. The default is #7.
13. Highlight Delete Digit and press Enter. Key in the numbers you want the system to use to delete the current
recording for this mailbox owner, then press Enter. Valid codes are up to four digits in length and can
include digits 0-9, *, #, and letters A - D. The default is NULL.
14. Highlight Disconnect Digit and press Enter. Key in the numbers you want the system to use to to force dis-
connect of the active port, then press Enter. Valid codes are up to eight digits in length and can include dig-
its 0-9, *, #, and letters A - D. The default is ****** (6 asterisks).
15. When you are done, press Esc to return to the Voice Mail Table menu. Press Esc again to return to the
Extension Application menu. The system prompts: "Exit This Feature?"; press Y for yes.
16. The system prompts "Save Current Setting?" Press Y to save your changes.
17. The system then prompts "File Exists, Override?" Press Y to continue with the save operation.
18. Press Esc to return to the Extension Application menu. Press Esc again to return to the Database Program-
ming menu.
Next, program the Voice Mail Dialing Ratio.
1. Highlight Call Handling and press Enter. The system displays the Call Handling menu.
2. Highlight Category 3 and press Enter. The system displays the Call Handling—Category 3 menu.
3. Highlight VM Dialing Ratio – Tone Time and press Enter to select 60, 90, 120, or 150 milliseconds. The
default is 90 milliseconds.
4. Highlight VM Dialing Ratio – Tone Inter-Digit Time and press Enter to select 60, 90, 120, or 150 millisec-
onds. The default is 90 milliseconds.
5. When you are done, press Esc to return to the Call Handling menu. The system prompts: "Exit This Fea-
ture?"; press Y for yes.
> P T P
ROGRAMMING HIRD
VM, A P
ARTY NALOG ORTS
- 242 -
DX-80 Programming Manual