Vertical Comdial DX-80 Technical Manual page 192

P C H
ROGRAMMING ALL ANDLING
4. Highlight the SMDR Call Output – Outgoing Call field. Press Enter to choose if you want to record SMDR
for outgoing calls. Valid choices are Y or N. The default is Y.
5. Highlight the SMDR Call Output – Incoming Call field. Press Enter to choose if you want to record SMDR
for incoming calls. Valid choices are Y or N. The default is N.
6. Highlight the SMDR Call Output – Account Code field. Press Enter to specify if you want the account code
to appear in the SMDR field. Valid choices are Y or N. The default is Y.
7. When you are done, press Esc to return to the Call Handling menu. The system prompts: "Exit This Fea-
ture?"; press Y for yes.
8. The system prompts "Save Current Setting?" Press Y to save your changes.
9. The system then prompts "File Exists, Override?" Press Y to continue with the save operation.
10. Press Esc to return to the Call Handling menu. Then press Esc again to return to the Database Programming
menu.
11. Next, program the Call Information Log (CIL) serial port baud rate. Highlight System Resource and then
press Enter. The system displays the System Resource menu.
12. Highlight Modem & Serial Port and press Enter. The system displays the System Resource—Modem &
Serial Port menu.
> S U SMDR C
ETTING P ALL
- 192 -
O
UTPUT
DX-80 Programming Manual