Vertical Comdial DX-80 Technical Manual page 130

P CO L
ROGRAMMING INES
4. Use the arrow keys to highlight the first Alt field for Monday, and set the time you want the time switching
to begin for tenant group 1. The default is 12:00 PM.
5. Highlight the To field for Monday, and set the time you want the time switching to end for tenant group 1.
The default is 1:00 PM (13:00).
6. Next highlight the Eve field for Monday, and set the time you want the night, or evening, time switching to
start for tenant group 1. The default is 5:00 PM (17:00).
7. Next highlight the Eve To field for Monday, and set the time you want the night, or evening, time switching
to end for tenant group 1. The default is 8:00 AM.
8. In the same manner, specify the Alternate and Evening modes for the remainder of the week. If you do not
want to use time switching for a particular day, set the beginning and ending times to 00:00.
9. Once you have set up the time switching you want to use for tenant group 1, continue setting up time
switching for tenant groups 2 and 3, if you are using multiple tenant grouping.
10. The DX-80 provides a shortcut if you are using multiple tenant groups, and want to use the same time
switching settings. If this is the case, program your settings for tenant group 1, then enter Y in the Follow
Tenant1 field for tenant group 2 and/or 3. If you set this field to yes, the system programs time switching to
the identical settings you entered already for tenant group 1; thus there is no need to re-enter the settings for
the remaining tenant groups.
11. When you are done, press Esc to return to the Database Programming screen. The system prompts: "Exit
This Feature?"; press Y for yes.
12. The system prompts "Save Current Setting?" Press Y to save your changes.
13. Then system then prompts "File Exists, Override?" Press Y to continue with the save operation.
14. Press Esc to return to the Database Programming menu.
15. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send.
> S CO L T S
ET INE IME WITCHING
- 130 -
DX-80 Programming Manual