Chapter 7 Commands; Tools Commands - Emerson Daniel 3415 Operation Manual

7 Commands
7.1

Tools commands

The Daniel MeterLink Tools menu commands provides the following utilities for the
meter's health status, monitoring operational conditions, establishing a baseline of the
meter's flow characteristics, updating the meter's program components and monitoring
communications between Daniel MeterLink and the meter.
Command
Edit/Compare Configuration
Waveform Viewer
Gas SOS Calculator
Outputs Test
Transducer Swap-Out
Set Baseline Wizard
Program Download
Communications Analyzer
Operations manual
Description
Open, edit, and compare configurations from files and meters.
Collect, view, save, print ultrasonic waveforms from meter or file.
Calculate speed of sound for a known gas composition.
Test frequency, current, and digital outputs by fixing them to a
set value.
Adjust path length parameters when changing out transducers,
stalks, holders, or mounts.
Establishes the baseline for the meter's flow characteristics that
can be used to monitor the heath of the meter run using Contin-
uous Flow Analysis features.
Upgrade the program components in Daniel Ultrasonic meters.
Monitor communications between Daniel MeterLink and a meter
Commands
109