Configuration
October 2023
10. If you encounter problems, refer to the contacts included in the Field Communicator
4.5
Security seals for the meter (optional)
For the integrity of the meter metrology and to prevent tampering with the transmitter
electronics and transducer assemblies, attach security latches on the endcaps. Also, if
required, install security wires on the Transmitter Electronics Enclosure endcaps, the
Bracket/Cover cap head screws.
See
Security seal installation
compound according to the customer's requirements (e.g., after approximately one to two
weeks of run time). Also, see
4.6
Configure users and network security
Starting with Rosemount 3410 Series Firmware v1.60, the meter must authenticate any
user making a connection to the meter using MeterLink. MeterLink will prompt for a
username and password that will be authenticated by the meter before a successful
connection is established. While the default password is unique to each meter, it is highly
recommended to be changed at meter startup. For added security, the default username,
administrator, can be changed as well.
See Manage Users in the Rosemount 3410 Series Gas Ultrasonic Flow Meters: Operations
Manual (00809-1100-3104) for more details on setting up users, user types and passwords
using the Meter → Manage Users dialog box in MeterLink.
If the 3410 Series Electronics will be connected to a network, please read the security
recommendations found in Cybersecurity and network communications in the Rosemount
3410 Series Gas Ultrasonic Flow Meters: Operations Manual (00809-1100-3104).
92
•
Diagram Page 3 - Service Tools → Alerts and Variables
•
Diagram Page 4 - Service Tools → Variables (continued), Service Tools → Trends,
and Service Tools → Maintenance
User's Manual.
and
Start-up for systems that use explosion-proof
Sealing the
unit. Seal the conduit ports with sealing
Installation manual
00825-0600-3104
conduit.
Gas Ultrasonic Flow Meters