Mitsubishi MOTORS M.U.T.-III Owner's Manual page 99

Reprogramming by CAN communication
Unnecessary
reprogramming
reprogramming
Target data
found
(4) Data search
Searching the target reprogramming data.
Complete
(5) Data check
-The appropriate reprogramming data is indicated.
-Press
(6) Reprogramming data check
-Check and press
-If you select other repro. data, press
back.
(7) Reprogramming
Reprogramming on board ECU starts.
(8) Reprogramming completed
-Reprogramming is completed properly.
-Reprogrammed ECU Part No. and S/W Part No. are
indicated.
-Press
92
< Unnecessary reprogramming >
・ Appropriate reprogramming data
is not released.
・ Onboard ECU Part No. and S/W
Part No. are indicated.
< Complete reprogramming >
・ Onboard ECU has reprogrammed.
・ Onboard ECU Part No. and S/W
Part No. are indicated.
button to go to next.
button.
button, and turn IG switch OFF.
button to