Mitsubishi MOTORS M.U.T.-III Owner's Manual page 53

How to Record the Data
(13) The contents check of setting (3/3) (Only if selected in (7))
The list of Threshold conditions appears.
-- to check recording setting
-- to check set items
Press button transmits the settings to the V.C.I.-- to (14)
(14) Transmit Confirmation
By pressing
settings are transmitted to V.C.I..
Press button.
(15) Once the settings have been transmitted from the PC to the
V.C.I., a message appears indicating that the settings have
been transmitted. Please wait a second.
(16) Press button.
Note:
-If you wish to start recording immediately, disconnect the
USB cable while leaving the V.C.I. switch ON.
(Disconnecting the USB cable starts to record the data on
V.C.I.) -- to (17)
-If you wish to just set the settings and later start recording,
turn the V.C.I. switch OFF and then disconnect the USB
cable.
(17) Recording
When you record with a manual trigger, connect the trigger
harness to the V.C.I. trigger terminal as necessary.
Note:
-When the
communicates with the PC, thereby prohibiting drive
recorder startup. Do not connect the USB cable.
46
button on screen (11)/(12)/(13), the record
USB cable is connected, the V.C.I.