Mitsubishi MOTORS M.U.T.-III Owner's Manual page 55

How to Record the Data
6-1-2. Recording on PC with displaying data
This section describes the operation for saving the data at a
file with displaying it as the set up record conditions on PC.
(1) System Select
Select a system for which the drive recorder is to be used
on the System Selection screen.
(For instruction on how to select a system, refer to 3-3-1)
- The following explanation describes how to set the drive
recorder settings of the MPI/GDI/DIESEL system as a
representative example.
(2) Selection of function.
Press Drive Recorder button.
<NOTE>
When a Check Mode button is effective, it's possible to
sample in a short interval when it's changed to a check
mode.
(3) Press Record button on the Drive Recorder function
menu.
Note:
Data display -- Displays the recorded data. (refer to 6-3)
or edit the data (refer to 6-2-2)
Record (Read Setting Conditions)
restore past recording conditions so that you can execute
recording under the same conditions as those used with
previously recorded data files. (refer to 6-1-3)
Data Storing -- The data saved in a removable disk can
be stored into the PC. (refer to 6-2-2 (7))
48
-- Allows you to