Reprogramming Operation ( V.c.i. - Pc Connected ) - Mitsubishi MOTORS M.U.T.-III Owner's Manual

Reprogramming Operation ( V.C.I. - PC connection )

9-5. Reprogramming Operation ( V.C.I. - PC connected )

9-5-1. Search method Selection
(1) Press Special function button on STV Top Menu.
(2) Press ECU Reprogramming button.
(3) Select an appropriate button.
Automatic Reprogramming (K-line) -- to 9-5-2(a)
- Automatically searches appropriate Reprogramming
data stored in PC.
Database File Display (K-line) -- to 9-5-2(b)
- Shows the list of Reprogramming data stored in PC.
Reprogramming Data Selection -- to 9-5-2(c)
- Allows selecting Reprogramming data in arbitrary drive
and directories.
Search -- to 9-5-2(d)
- Allows searching the target data by ECU No., ROM-ID,
etc.
Automatic Reprogramming (CAN) --to 9-6(a)
- Automatically searches appropriate Reprogramming
data stored in PC.
Database File Display (CAN) --to 9-6(b)
- Shows the list of Reprogramming data stored in PC.
Memory card transfer --to 9-4-1
- Transfer of stored Reprogramming data to Memory card.
Connect PC and V.C.I., and prepare following steps.
1. Connect M.U.T.-III Main Harness B or A to V.C.I. securely.
2. After verifying the ignition switch position at LOCK (OFF),
connect the M.U.T.-III Main harness B or A to the
vehicle's diagnosis connector.
3. Turn Ignition switch on, and turn V.C.I. main switch on.
(Do not start engine)
86