SWS Monitor Operation
(5) Setting the Recording Time
The recording time can be set from 0day 0h 0min to 5days
0h 0min. If you do not wish to set a recording time, press
button without setting the time.
The day and time are set using
-Day --Unit: 1 day
-Hour--
-Minute--
You can also set the time using the slide bars.
(6) Checking the Recording Settings
Check the recording settings and press
transmit the data to the SWS monitor cartridge.
A message appears indicating that the recording settings
will be transmitted to the I/F cartridge. Press
(7) Recording Using the Drive Recorder
Once the data have been transmitted to the SWS monitor
cartridge, the screen shown at left appears. If the trigger set
was a manual trigger, press
If the trigger set was an item trigger, recording begins when
the set conditions are met.
Note:
To disconnect the SWS monitor cartridge, press
The following message appears: "Do you wish to
disconnect the I/F cartridge? (If so, select YES, then wait for
the ready message to appear.)" Once the ready message
appears, disconnect the cartridge.
(8) Ending Recording
To end recording, press
70
Unit: 1h,
Unit: 1min,
button to start recording.
button.
.
Unit: 5h
Unit: 10min
button to
button.
button.