Mitsubishi MOTORS M.U.T.-III Owner's Manual page 79

SWS Monitor Operation
7-1-6. Keyless Entry Function
Pushing the vehicle hazard switch erases ID
completely.
(1) When pressing Keyless Entry button on 7-1-1.(5), the
screen illustrated on the left appears.
Keyless ID Regist
Recept Inspect
(2) Deleting Keyless ID
When pressing
screen illustrated on the left appears. In this screen, all of
registered Key ID at present can be deleted.
-- Delete all Key ID
-- Cancel
(3) Pressing Hazard warning lamp switch of the vehicle deletes
the ID completely.
(4) Keyless ID Registration
Press Lock-switch or Unlock-switch of the key to be
registered three times continuously.
(5) Checking for signal detection
Press Recept Inspect
illustrated on the left appears.
Press Lock-switch or Unlock-switch of the key to be
checked. When ECU acknowledges the Lock or Unlock
signal, it displays the signal name and state of the key for
the vehicle.
72
--Delete and register ID -- to (2)
--Check for signal detection. -- to (5)
Keyless ID Regist
button on (1), and the screen
button in (1), the