Mitsubishi MOTORS M.U.T.-III Owner's Manual page 17

V.C.I. Functions
2-2-4. V.C.I. Stand-alone Diagnosis
You can read out DTCs with V.C.I. stand-alone by using a
memory card, which is storing a diagnostic data transferred
from PC. There is no need to carry PC or USB cable on the
diagnosing vehicle. (For detailed operation, see 4-4)
1. Transfer the diagnostic database file into a memory card.
(4-4-1)
2. Insert the memory card into V.C.I., and then connects the
V.C.I. and the vehicle with an appropriate main harness.
3. Start reading out DTCs from vehicle-installed ECU by V.C.I.
stand-alone. (4-4-2)
Note:
Until a new database file will be distributed, you do not have to
operate above step1. Please proceed just step2 and 3.
10