Mitsubishi MOTORS M.U.T.-III Owner's Manual page 85

Data preparation on PC from Update CD-ROM
< CASE 2 >
(1) By inserting ECU Reprogramming data CD-ROM in the
CD-ROM drive of a PC, update of ECU Reprogramming
data starts automatically. And by operating it according to
the message displayed, it is possible to update the ECU
Reprogramming data in M.U.T.-III in the newest state.
(2) After terminating M.U.T.-III, insert Reprogramming data
CD-ROM in the CD-ROM drive of a PC.
(3) Confirmation of update
Click the "Yes" button, update of the ECU Reprogramming
data in M.U.T.-III is started.
Remark:
An end message changes by the kind of data updated at this
time.
(4) Update finished
(Case A)
Update was finished. Click the "OK" button, update of ECU
Reprogramming data is ended.
Double-click the M.U.T.-III icon displayed on the desktop to
start up the system.
(Case B)
Update was finished. Click the "OK" button, the PC is
rebooted automatically.
After rebooting the PC, Double-click the M.U.T.-III icon
displayed on the desktop to start up the system.
(5) Update is unnecessary
The ECU Reprogramming data in M.U.T.-III is in the newest
state. It is not necessary to update ECU Reprogramming
data. Click the "OK" button, this update application is ended.
78