Basic Flow To Start Diagnosis - Mitsubishi MOTORS M.U.T.-III Owner's Manual

3-3. Basic Flow to Start Diagnosis

*a
*a
Note:
M.U.T.-III for EU countries, the options
for Model Year is classified in
"Up to 2004 MY" and "From
Basic Flow to Start Diagnosis
3-3-1. Basic Flow of System Select Diagnosis
(1) M.U.T.-III Start Screen
Press STV (Scan Tool Viewer) button on the M.U.T.-III
Start Screen.
(2) STV Top Menu
Press System Select button on the STV Top Menu screen.
(3) System Selection Screen
Select either one of "Up to 2005MY" or "From 2006MY" for
the Model Year of the vehicle you are diagnosing.
Then follow the each operation below.
When selecting "Up to 2005 MY"
1. Select a system on the System List
2. If the system has a loading option, the Loading Option
*c
When selecting "From 2006 MY"
1. Confirm the contents of the Vehicle Information list
*b
2. Select a system on the System List
2005 MY".
Setup list will be displayed
(*b)
having a box checked ( ) and press
-When the contents are not describing the vehicle, press
to correct the information. (For details, refer to 3-3-2)
Option Setup list
(*b)
box checked ( ). Then press
15
, and press
(*a)
Then, select an item
.
button.
, and if the Loading
(*a)
is displayed select an item having a
,
button.
.
.
(*c)