Mitsubishi MOTORS M.U.T.-III Owner's Manual page 56

How to Record the Data
(4) Item Select
• Select an item you wish to record and apply the
selection-using
--Inserts the item selected in "Available items list" into
the selected area of "Selected items list".
--Inserts the item selected in "Selected items list" into
the lowermost area of "Available items list".
--Inserts all the items from "Selected items list" into
the lowermost areas of "Available items list".
--Changes the order in which the items are displayed
in "Selected items list" and "Available items list", in
the sequence of default setting.
• When complete the selection, press
Note:
-A maximum of 16 items can be recorded.
-"Fuel pressure" and "Voltmeter" cannot be selected
simultaneously.
When you select the item "Fuel pressure"
1. Pressure gauge list is displayed after the item selection.
Select a type of pressure gauge used for fuel pressure
measurement, and press
2. Set up calibration voltage of the pressure gauge,
and press
Note:
For details on how to measure calibration voltage,
refer to 11-3-1(1).
(5) Trigger method / Recording style Select
• Select trigger method, and put
• Put
mark on "PC Drive recorder".
• When completed the selection, press
"Manual Trigger" -- Allows you to set the trigger manually.
"Diagnosis Code Trigger" -- Applies the trigger when the
specified diagnostic code is generated. -- to (6)
"Threshold Trigger" -- Applies the trigger when condition
49
button.
button.
button.
mark(s). (Multiple selection)
-- to (8)
meets the set threshold. -- to (7)
button.
button.